Knob — Antique Bronze
Product code: KNOBANTIQUEBRONZE
Knob — Antique Bronze is a knob crafted from zinc alloy with brushed finish. Ref: KNOB/ANTIQUE/BRONZE. The finish is enduring — resistant to tarnishing and everyday wear from years of...
Free delivery and fitting included
Order now, delivered by
Dispatched within 3–5 working days via tracked courier
Knob — Antique Bronze is a knob crafted from zinc alloy with brushed finish. Ref: KNOB/ANTIQUE/BRONZE. The finish is enduring — resistant to tarnishing and everyday wear from years of use.
Knobs work on both doors and drawers. Particularly suited to shaker and in-frame kitchens. For drawers, a single central knob is the traditional placement. For a cohesive kitchen, match handle finish to your taps, sink, and any rail or lighting hardware.
Sold individually. Each handle includes M4 fixing bolts sized for standard 18mm kitchen doors.
| Reference | KNOB/ANTIQUE/BRONZE |
|---|---|
| Type | Knob |
| Finish | Brushed nickel |
| Material | Zinc alloy with brushed finish |
| Centre-to-centre | N/A — single fixing point |
| Projection from door | 28mm |
| Fixing bolts | M4 bolts included (for 18mm doors) |
| Sold as | Individual handle |
Fitting Notes
Drilling required. Doors are supplied undrilled. Mark your handle positions using a jig or template for consistent spacing across all doors and drawers. Centre-to-centre measurement: N/A — single fixing point.
Drill size. Use a 5mm drill bit for the M4 fixing bolts. Drill from the front face of the door to avoid chipout on the visible side.
Fixing. Insert the bolt from inside the door/drawer, through the handle, and tighten with a screwdriver. The included M4 bolts are sized for 18mm doors — if your doors are thicker, longer bolts are available from any hardware supplier.
Consistent placement. We recommend using a simple drilling jig (a piece of MDF with pre-drilled guide holes) to ensure every handle sits at the same height and position. Measure twice, drill once.
What drill bit size do I need?
5mm for the M4 fixing bolts supplied. Drill from the front face of the door to prevent chipout on the visible surface.
How many handles do I need?
One handle per door, one per drawer. For a typical kitchen with 10 doors and 6 drawers, order 16 handles. We recommend ordering 1-2 spares in case of future damage or additional cabinetry.
What does centre-to-centre mean?
Centre-to-centre (c/c) is the distance between the two bolt holes measured from the centre of one hole to the centre of the other. For this handle, the c/c is N/A — single fixing point. This is the measurement you need when marking your drill points.
Will these bolts work with thicker doors?
The included M4 bolts are sized for standard 18mm doors. If your doors are 20mm or 22mm thick, you will need slightly longer M4 bolts — these are available from any hardware supplier or DIY store for a few pence each.
Complete Your Kitchen
Pair your new worktop with matching kitchen doors
Everything you need for your kitchen refresh
Not sure about size or layout?
Try our visual worktop designer to see your chosen quartz in different kitchen layouts.